We specialize in hard to find items
All Categories
Evercoat 125 Rage Ultra Body Filler - 0.8 Gallon
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Evercoat 125 Rage Ultra Body Filler - 0.8 Gallon
Evercoat Rage Ultra is the world’s best sanding body filler. This automotive body filler has unparalleled sanding qualities which are a result of the patented EcoResin. The non-sag formula of this sanding auto body filler has excellent filling properties, while eliminating the need for finishing car putty. Rage Ultra contains ZNX-7 and is part of the Metalworks system. For best results, clean, degrease and dry the surface. Use 40–80 grit to remove the paint and featheredge. Stir the filler and knead the hardener before using. Add the hardener to the filler 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4-inch diameter puddle). Approximate setting time is 3–5 minutes at 72°F (22°C). Apply in layers with firm pressure. Do not apply all at once. Sand body filler with 80-180 grit sandpaper. If necessary, re-apply Rage Ultra to fill any pinholes or low spots, allow filler to dry and then sand with 180 grit sandpaper. Finish sand with 180 grit. Allow minimum of 20 minutes sanding time over silicon bronze welds. NOTE: For optimum performance apply 440 Express before applying primer surfacer. Evercoat leads the industry in the use of “green” technology. Evercoat Products produce a quality collision repair, every time, everywhere.
