All Categories
IMPORTANT Make sure there is no pressure in the line while installing or removing push-lock fittings. Turn off the pump and remove the nozzle from the line to relieve the pressure. To effectively release the tubing from the fitting tubing, Push-lock release tool also can be used. Tubes are pushed approximately 1/2" into fitting. Consider this tube loss while designing tube runs. PREVENTING LEAKS 1.Ensure tube is cut straight and firmly pushed all the way into the fitting. 2.Prevent any immediate bends near fittings; clamps should be placed 2" from fitting joints. 3.If leaks persist, remove the tube from the fitting and cut it straight another ½" and firmly reinsert it into the fitting.