We specialize in hard to find items
All Categories
MG Chemical 9510 One-Part Epoxy Potting Compound 300ML Cartridge (Heat Cure Required)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About MG Chemical 9510 One-Part Epoxy Potting Compound
9510 is a black, rigid, one-part epoxy potting compound. It has unlimited working time at room temperature and does not require frozen storage. Frozen storage will extend the shelf life.It provides excellent electrical insulation and protects against static discharges, vibration, thermal shock,environmental humidity, salt water, fungus, and many harsh chemicals. 9510 has a low viscosity and canbe readily used in manual, pneumatic and robotic dispensing processes.Application Instructions:For best results, follow the procedure below.This product does not require mixing prior touse, and can be applied with a spatula, trowel,or automated dispensing machine.Cartridge:1. Twist and remove the cap from the cartridge.Do not discard the cap.2. Dispense the epoxy evenly to both surfaces.3. To stop the flow, pull back on the plunger.4. Clean nozzle to prevent contamination andmaterial buildup.5. Replace the cap on the cartridge.Cure InstructionsRoom temperature cure:Do NOT cure at room temperature. This productwill only cure at elevated temperatures.Heat cure:• Put in oven at 80 °C [176 °F] for 3 h.—OR—• Put in oven at 90 °C [194 °F] for 1 h.—OR—• Put in oven at 120 °C [248 °F] for 30 min.
