Naples Naturals - NBLK109-1 109X1 Alkaline Water Pitcher - Removes Chlorine and Contaminants Plus Increases pH (Black), (Model: AOK109-BLK-01)

Pay with

About Naples Naturals - NBLK109-1 109X1 Alkaline Water

Newly designed alkaline water filter cartridge to minimize the chances of clogging. Drink fresh clean great tasting water with the BPA FREE Naples Naturals 10 cup water filter pitcher. Sits right on your counter or in your refrigerator and is the perfect way to provide great tasting water. Features digital electronic filter life readout lets you know when it's time to change your filter. Newly designed screw in filter protects water better than the old drop in filter designs BPA free plastic easy fill convenient 10 cup capacity filter life the filter should be changed every 70 gallons or roughly 45-60 days depending on water usage. Directions Rinse the filter under cold water for about 30 seconds. Gently tap the filter on the counter (both sides) to ensure the media is proportioned nicely. Remove the water reservoir and screw the filter into the bottom of the reservoir and replace the assembly back into the pitcher. Fill and discard 2-5 pitchers or until the water is clear and there are no more charcoal particles in the pitcher water. Fill and enjoy! The filter should be replaced every 70 gallons or when the filter replacement indicator signals a changed is needed. Do not use with hot water.The Naples Naturals 109 Water Pitcher consists of four major parts: the pitcher body, the upper reservoir, the lid, and the filter cartridge. Inside the product box, the pitcher body, upper reservoir, and lid are all assembled. Inside the upper reservoir is the filter cartridge, wrapped in a foil bag. This filter cartridge is not visible until the lid is removed. The pitcher body, upper reservoir, and lid are wrapped in a single polymer bag, which itself is wrapped in bubble wrap. This can be found directly inside the product box. The outside of the product box itself contains set up and troubleshooting instructions; do not therefore dispose of the product box without reading it. To set up the Life Indicator, press and hold the "SET" button, found on the lid of your water pitcher. When you see "60 Days" as well as four thick horizontal lines appear on the screen, release the button. At this point, the Life Indicator will begin to count down 60 days, which is the average lifespan of a filter cartridge. The four horizontal bars act as a second visualization for the filter lifespan, with four bars indicating 100% life remaining, three bars indicating 75% life remaining, two bars indicating 50% life remaining, and one bar indicating 25% life remaining. After sixty days, the life indicator will display a flashing "0 days" and no horizontal bars, meaning that 60 days has passed and it is recommended that the filter be replaced. The filter has a typical life of 60 days but this can vary significantly depending on usage and on your local water quality. Heavy usage or having to filter water with a high level of contaminants may necessitate changing the filter more frequently; whereas light usage or filtering water that is already relatively clean will allow less frequent replacement. The 60 days timer and four horizontal bars act only as a reminder, and do not measure the actual capacity of the filter cartridge.