We specialize in hard to find items
All Categories
TOPCHANCES 220V 4.5kg/h 3500-5000ML/H Industrial 10 Head Ultrasonic Mist Maker Fogger Air Humidifier w/Transformer Accessories Fountain Pond Atomizer Greenhouse Hydroponics for Garden/Lawn/Pond
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About TOPCHANCES 220V 4.5kg/h 3500-5000ML/H Industrial 10
Note: Note:This item only support 220V Parameter ： 1.Power supply:220V 2.Working Voltage:DC48V 3.Working Current:4.8A-5A 4.Power: 360W 5.Output power:250W 6.Spray volume: 3500- 5000ML / H 7.Cooling model :Air-cooled 8.Shell Material: 304 stainless steel shell, shell polished surface treatment Kind Remind: 1. When the atomizer work, please do not put your hand over the top of the atomizer spray chamber to prevent ultrasonic wounded. 2. Nebulizer must be working in the water in order, before using the water and then put it in its power, and to ensure that there is water in a spray film surface state, in order to avoid damage to the nebulizer. 3. When you stop using the nebulizer before disconnect the power, then remove from the water atomizer. 4. When using the nebulizer, please use the output power of more than 250W, the output voltage is DC45 ± 5V supply. 5. When generating a plurality of atomizer is set using the same container, each with a separate power supply need not connect a plurality of the nebulizer for use with a single power supply, and note the respective atomizer are mutually conductive housing, in order to prevent the work galvanic corrosion. 6. Mist generated by the nebulizer must use fan forced discharge, and each group of nebulizer reserved 350CM2 of flat space, the water temperature is too high to avoid shortening the life of the nebulizer. 7. Nebulizer not suitable for corrosive liquid atomization, to avoid damage to the atomizer and atomized metal sheet. 8. Do not damaged during installation level sensor switch, switch failure caused the water level to prevent runaway nebulizer. Level switch should stop after the damage, otherwise there will be further damaged dry atomized piece atomizer. At this point in order to use the required repairs by qualified service personnel after a good.
