TUATUA Second Generation Empty Capsule Plates Holder with Spreader, 100 Holes 0# Vitamins Coffee Powder Manual Filling Capsules Tool

Pay with

About TUATUA Second Generation Empty Capsule Plates

Specification:Condition: 100% Brand NewItem Type: Capsule FillerProduct Material: ABSHoles Quantity: 100Suitable for Capsule Type: 0#/00#Alignment Plate Size: 6.5 x 6.5 x 2.5inchPackage Weight:800gOperational Steps:1. Place the Director Plate on the top of the body Plate2. Pour the long halves of the capsules into the Director Plate. Hold both parts and gently shake from side to side till the majority of capsule fall into the holes. Manually reposition the last few capsules into the remaining 3. Remove the Director Plate. Push down the body plate to make sure if any capsules are the wrong way around. If any, upright these capsules4. Pour your filling onto the capsules5. Spread around with the powder spreader to make sure the powder cover capsules evenly6. Using the Tamper, compact the filling gently. Add more filling to fill the capsules evenly again7. Now place the Director Plate on top of the Cap Plate8. Pour the short halves of the capsules into the Director Plate. Hold both plates and shake from side to side gently. Manually reposition the last few capsules into the remaining holes. Remove the Director Plate and check for any capsules the wrong way around. Upright any you find9. Place the Middle Plate on top of the Cap Plate. Ensure the grooves are facing up10. Hold the Cap and Middle Plates together and flip them over and make sure the grooves are facing down11. Push hard several times to connect the capsule halves together12. Remove the Cap and Middle Plate and ensure the capsules are properly closed by pressing down on them, or remove them and then pinch togetherPackage Content:1xDirector Plate1 x Body Plate1 x Middle Plate1 x Cap Plate1 x Temper1 x Power Spreader1 x Handle1 x Edge to keep the powder from falling off the top