【Upgrade Version】Tile Leveling System Kits 100PCS & 500PCS 1/16 Inch Tile Spacers with Wrench, Reusable Flooring Level Tile levellers & Replaceable T-pin, DIY Wall & Floor Construction Tools by Tanek

Pay with

About 【Upgrade Version】Tile Leveling System Kits

Highlight of These Tile Leveler: ✔Prevent tiles from moving while curing. ✔Reduce the time for grinding and polishing. ✔Ensure the tile balance on the same horizontal position. ✔Improve tile installation speed and reduce installer fatigue/stress. ✔Steel needles can be replaced to ensure leveling effect and more humanized. Specification: Packing quantity: 100 PCS Material: PP + Stainless Steel Tile Gap: approx.1/32-1/16 Application: floor and wall use ✶How to Replace the Steel Needle? 1.Remove the nut cover; 2.Put the T-steel needle into the groove; 3.Put the the red cover into the groove ; 4.Tighten the nut cover. Note: T-pin can be replaced in case of broken or deformed needle. ✶Instructions for Use: 1.Tile gap should be kept between 1/32-1/16 inches when tiles are laid; 2.Take out the adjuster and insert T-pin along the crack, then clamp the T-pin at the bottom of the two ceramics and rotate it 180 degrees; 3.Tighten the adjustment cover clockwise by hand or with a special wrench, so as to make ceramic are in the same level; 4.Before the cement or tile glue has completely dried up (usually no more than 5 hours), tighten the adjusting cover anti-clockwise, then rotate the T-pin 90 degrees. Tips: 1.We recommended to leave a gap of 1.5mm or more. 2.Before tightening, it is recommended to rotate the T-pin for several times so that the surrounding cement tile glue can get some space for easier removal of the adjuster. Package Includes: 2 x Wrench 200 x Tile Spacers 100 x Tile Levelers 20 x Replaceable Steel Needles