We specialize in hard to find items
(1)
Dixon 3/8" Hose ID, 1/4" Male NPTF Swiv x Push-on Hose Barb, Brass, Dryseal (271-0604)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Dixon 3/8" Hose ID, 1/4" Male NPTF Swiv X Push-on
Supplier: Dixon®Material: BrassMale Thread: NPTFMale Thread Size: 1/4"-18Hose ID: 3/8"Hex: 9/16"Length: 2.12"Unit Weight: 7.4 lbs. per 100 pcs.Weight (lb): 0.0735Specifications: Number of Barbs: 2 ; Barb Length: .97" Construction: DrysealInstallation: Assembly Instructions:; 1. Trim hose end with smooth square cut.; 2. Lubricate either push-on fitting, hose or both.; 3. Insert push-on fitting into hose until first barb is in hose.; 4. Place end of fitting against a flat object (bench, wall, etc.) and gInstructions: Disassembly instructions: ; 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.; 2. With firm grip on hose, give a sharp downward pull to release theNote: No hose clamps or ferrules are needed; Swivel is for assembly convenience only, not for live swivel applicationsSafety notes: Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.; Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.; WARNING:
