RunCam 5 1080P FPV Camera RunCam5 4K HD Action Cam Video Recording 145 Degree NTSC/PAL 16:9/4:3 Switchable for FPV Quadcopter Drone Racing

Pay with

About RunCam 5 1080P FPV Camera RunCam5 4K HD Action Cam

Parameter: Image Sensor: SONY IMX 377 (12MP) Video Resolution    4K@30fps / 2.7k@50fps / 1080P@120fps / 1080P@60fps / 1440P@60fps Field of View (FOV)    145° Video File Format: MP4 TV-OUT: Support Communication Interface: Micro USB microSD Card supported: Up to 128G; U3 recommended (2.7K50/1080P120 requires U3 or above; other solutions require U1 or above) Please make sure that the file format of the SD card is FAT32, otherwise, it will easily cause errors. WiFi: Nonsupport USB Power Input: DC 5-15V Battery Capacity: 950mAh Power Consumption: Max 620mA @5V Dimension: 38*38*36mm Net Weight: 56g (with battery) Basic Camera OperationPowering On/Off: Long press the Shutter button with Green LED on, the camera is under standby mode.Mode Switch: Double-click the Shutter button to cycle through the recording mode (Green LED), setting mode (Blue LED) Recording On/Off: In the recording mode, click the Shutter button to start recording, the green light flashes; click the Shutter button again, the recording stops, the green light stops flashing. Parameter Settings: Set in the RunCam AppForced Shutdown: Simultaneously press the Shutter button and Reset button.Formatting: In standby mode. Triple-click the Reset button, with a long beep and Green LED blinks three times. Reset: In standby mode. Long press the Reset button, with three beeps and Blue LED blinks three times.·Connection to ComputerAfter turning on the camera, connect it to the computer via USB cable, then it will be recognized as a removable disc.NOTICE: If the camera can not be recognized by the computer after connecting, please make sure that a microSD card is well inserted. If the information on microSD card can not be read normally, please try with another micro USB cable or USB port on the computer.