All Categories
Steps for usage 1: Before use, disinfect the thermometer sensor head with alcohol 2: Press the power button, the buzzer will make a beep sound, and the prompt symbol will be displayed 3: Subsequently, the display shows the last measured temperature for 2 seconds, then the ° C symbol on the display flashes, indicating that it is in the state to be measured 4: Put the thermometer sensor head into the water, the display shows that the temperature gradually rises. At the same time, the ° C symbol flashes, indicating that the measurement is in progress. If the temperature remains unchanged for 16 consecutive minutes, the ° C symbol stops blinking, indicating that the water temperature measurement is complete and the measurement result is memorized, and the displayed temperature value can be read 5: After the measurement is over, if you do not press the power button to turn off the power, it will automatically shut down after 8 minutes The working temperature is: 0 ℃ -55, the working humidity is 80% R, and the working voltage is 1.5V. Net weight: about 11 grams Dimensions: 120 (length) * 15 (width) * 10 (thickness) mm safe and practical electronic thermometer, no longer worry about the children using traditional temperature timers caused by the broken glass caused by the bad consequences. And can accurately test the water temperature in a very short period of time, supplies for household use. Designed for babies, the heat detection time is about 1 minute, the measurement accuracy is 0.1 degrees, with sound prompts and memory function.