Fms RC Airplane Reflex V2 Mini Gyro Flight Control System for Remote Control Aircraft Plane

Pay with

Fms RC Airplane Reflex V2 Mini Gyro Flight Control Features

• Utilizes a high-speed 32-bit ARM processor onboard.

• Sensors: Solid-state 3 axis gyro and 3 axis accelerometer.

• Automatically recognizes SBUS/PPM/PWM systems, compatible with all radio systems with 4 channels or above. If you are using a 4 channel transmitter, use the included jumper to select between flight modes by plugging it into the “gyro mode input” port.

• Easy operation- the Reflex system is programmed specifically for the aircraft it is connected to. No further programming is needed.

• The user only needs to connect their receiver to the gyro and setup the aircraft normally. Please read the enclosed manual carefully before using the product.

About Fms RC Airplane Reflex V2 Mini Gyro Flight Control

Fms Reflex V2 can be reprogrammed easily with different model files via a simple software-allowing pilots to use the same flight control unit as they progress to different aircraft. Flying is simple when you have your very own "co-pilot"- the Reflex V2! REFLEX FUNCTIONS 3 flight modes are available: Stabilized, Optimized or off. 1. Stabilized mode: Designed for beginners, Reflex will rapidly level the aircraft from any attitude when this mode is activated. Stabilized mode combines accelerometer and gyro data to determine how to level the aircraft when the control sticks are released- giving pilots absolute peace of mind. 2. OFF: Turns off all gyro functionality, the aircraft is flown completely manually when the gyro is off. 3. Optimized mode: Utilizing advanced solid-state gyros, the Reflex system maintains aircraft attitude by counteracting inflight upsets- from gusts to crosswinds. With Reflex, even small aircraft will fly with the confidence of something much larger! Operation instructions 1. SBUS\PPM input: Connect the 3-wire cable into the port that is labelled SBUS\PPM. Ensure that the polarity of the cable is correct. The default channel assignment is aileron, elevator, throttle, rudder and mode switch (Note: Different aircraft may have different flight modes, refer to your aircraft manual for more information). If the channel assignment does not fit that of your transmitter system, change the channel order from your transmitter. 2. PWM: Connect the throttle and flight surface channels to their corresponding ports on the Reflex system. Connect a 3 wire cable from the channel that is controlled by your 3 position switch to the port labelled SBUS\PPM to control the gyro mode.