Green M620 High Temperature Retaining Compound High Viscosity Gap Sealants 50 ml for Sealing The Cylindrical Components and Anti-Rust(M620)

Pay with

Green M620 High Temperature Retaining Compound High Features

• WARM REMINDER: The bottle is more than 1/2 empty because the glue hardens in the absence of air, so filling the bottle completely would cause the glue to start hardening. The bottle is air permeable and allow air to pass through the wall. There is also some air gap over the product inside the bottle to maintain stability of glue. Thus a 50 ml pack of contains 50 ml glue in a much larger bottle.

• APPLYING: Applying fill gaps up to 0.25mm with 25-40 mins fixture time. High strength, high viscosity and high temperature resistance. Solidification time(first solidification/full solidification): 20m/24h. Service maximum temperature: 230℃. Shear strength on steel: 3800PSI. Viscosity at 35.0 °C Spindle 3, speed 20 rpm is around 8000 mPa·s.

• USE-METHOD: 1. Clean all surfaces. 2. Shake well before use. 3. Apply sufficient product onto the bolts at the nut engagement area. If parts have come into contact with water-based solvents or cutting fluids and a protective layer is left on the surface, flush with hot water before gluing.

• WHAT CAN DO: Green color, high strength, high temperature performance and oil tolerance for the bonding of cylindrical metal fitting parts. Can eliminate micro-vibration wear phenomenon, withstand high load and anti-rust. The product prevents loosening and leakage from shock and vibration. It provides slow curing and works on steel, stainless steel, aluminum and plated metal parts.

• APPLICATION: This retaining compound is widely used in automotive for valve covers, oil pans, sleeves in pump, housings, bearings, engines, radiator assemblies and others to extend the lifespan and improve the durability of components, particularly good for applications where requires high temperature resistance up to 230°C.

About Green M620 High Temperature Retaining Compound High

Description Features: - Locating pins in radiator assemblies, sleeves in pump housings and bearings in auto transmissions. - Takes around 25-40 mins for fixture time. - Very high viscosity. - There are some air in the bottle to keep glue stable. - Bonding of cylindrical metal fitting parts, suitable for applications where temperature resistance up to 200°C is required. - Eliminating micro-vibration wear phenomenon, withstand high load and anti-rust. - Applying fill gaps up to 0.25mm . - Service maximum temperature:-54~230℃. - Shear strength: 3800 psi. - Solidification time(first solidification/full solidification): 20m/24h. - Cures when confined in the absence of air between close fitting metal surfaces. - Offers high temperature performance and oil tolerance. - The sealants are recommended NOT to be used in pure oxygen or in pure oxygen environments. Package including : - 1 x 50ml thread locking adhesive.