Green M680 High Strength Retaining Compound Low Viscosity Gap Sealants 50ml for Sealing The Cylindrical Components and Anti-Rust(M680)

Pay with

Green M680 High Strength Retaining Compound Low Features

• WARM REMINDER: The bottle is more than 1/2 empty because the glue hardens in the absence of air, so filling the bottle completely would cause the glue to start hardening. The bottle is air permeable and allow air to pass through the wall. There is also some air gap over the product inside the bottle to maintain stability of glue. Thus a 50 ml pack of contains 50 ml glue in a much larger bottle.

• APPLYING: Applying fill gaps up to 0.38mm with 4 mins fixture time. Strength: high. Solidification time(first solidification/full solidification): 4min./24h. Service maximum temperature: 180℃. Shear strength on steel: 4000PSI. Viscosity at 25.0 °C Spindle 3, speed 20 rpm is between 745 – 1720 mPas and Viscosity on cone / plate at 25.0 °C is between: 652 - 1859 mPas.

• USE-METHOD: 1. Clean all surfaces. 2. Shake well before use. 3. Apply sufficient product onto the bolts at the nut engagement area. If parts have come into contact with water-based solvents or cutting fluids and a protective layer is left on the surface, flush with hot water before gluing.

• WHAT CAN DO: Green color, high strength, high temperature performance and oil tolerance for the bonding of cylindrical metal fitting parts. Can eliminate micro-vibration wear phenomenon, withstand high load and anti-rust, particularly where low viscosity is required. The product prevents loosening and leakage from shock and vibration. It provides robust curing performance and works on steel, stainless steel and plated metal parts.

• APPLICATION: The retaining compound is widely used in automotive for valve covers, oil pans, pumps, engine and others to extend the lifespan; at home for bicycle, motorcycle, lockset, lawn mower, hardware and so on to ensure the bolts stay in place; in shop for homemade project fix, sealing bezel, freestyle drone, desktop printer and more to improve the performance of product.

About Green M680 High Strength Retaining Compound Low

Features: - Takes around 4 mins for fixture time. - Low viscosity. - There are some air in the bottle to keep glue stable. - Bonding of cylindrical metal fitting parts, particularly where low viscosity is requireds. - Eliminating micro-vibration wear phenomenon, withstand high load and anti-rust. - Applying fill gaps up to 0.38mm . - Service maximum temperature:-54~180℃. - Shear strength: 4000.0 psi. - Solidification time(first solidification/full solidification): 4min./24h. - Cures when confined in the absence of air between close fitting metal surfaces. - Offers high temperature performance and oil tolerance. - The sealants are recommended NOT to be used in pure oxygen or in pure oxygen environments. Package including : - 1 x 50ml thread locking adhesive.