FURNITLEG Heavy Duty Rotary Hammer Drill, 3-in-1 Functions 1200W 2-stroke Hammer Drilling Machine Including Funnel, Fuel Tank, Chisels and 3 Drill Bits, Hand Pull Start Gas Powered Hammer Drill

Pay with

FURNITLEG Heavy Duty Rotary Hammer Drill, 3-in-1 Features

• 3-in-1 Functions: Equipped with three drill bits and two different chisels, it can be used for hammer, drill, or pick by adjusting the knob on the side to meet your diversified needs .

• 5300RPM Power: The two-stroke engine with high power (1000W) and large displacement (33CC), as well as an enlarged thick-walled cylinder, can achieve a high impact frequency (3200min-1) and impact energy (30J) to easily and quickly penetrate concrete, bricks, rocks, etc with a high speed (5300rpm).

• Saving Fuel: The built-in carburetor can effectively atomize the fuel, allowing it to burn more fully. This not only improves the efficiency of the engine, but also reduces fuel consumption and saves energy costs.

• Good Filtering Effect: The built-in air filter can effectively filter out impurities in gasoline, prevent them from entering the engine, thereby reducing engine fuel consumption and improving fuel economy. In addition, it can also extend the service life of the engine, providing more stable and reliable performance for the vehicle.

• Easy to Use: The wireless design and light weight can improve the flexibility of operation. You can pull the rope to start the machine. Besides, the throttle switch, one-button flameout switch, and auxiliary handle allow for convenient use.

About FURNITLEG Heavy Duty Rotary Hammer Drill, 3-in-1

Specification Color: Black Material: Aluminum, Plastic, Silicon Style: Modern Surface Treatment: Painted Process Assembly Required: Yes Max. Power: 1000W Displacement: 33CC Engine Type: Single Cylinder, Air Cooling, 2-stroke Impact Frequency: 2300-4000bpm Impact Energy: 30J Max. Torque and Speed: 1.45N.m/5300rpm Fuel Mixture Ratio: 25:1 (Gasoline: Motor Oil) Fuel Tank Capacity: 0.9L/0.2gal/30Oz Fuel Consumption Rate: ≤0.5L/0.1gal/16Oz Per Hour Max Drilling Diameter: 40mm/1.5inch Starter System: Hand Pull Start Noise: ≤104dB Net Weight (Exclude Drill): About 10.5kg/23lbs Product Size: 67.2*25*24.5cm/26.5*9.8*9.7in Engine Size: 36*32mm/14*12inch Drill Size: 22*350mm/0.8*13inch Point Chisel Size: 35cm/13.8in Flat Chisel Size: 16*280mm/6*11inch Auxiliary Handle Length: 13cm/5inch Installation 1. Press down the collet. 2. Put in a drill bit or chisel. 3. Release your hand. 4. The installation is complete. Package Included 1* Hammer Drilling Machine 3* Drills 1* Point Chisel 1* Flat Chisel 1* Fuel Tank 1* Funnel Other Accessories for Assembly Notes 1. Before each use, please check whether the oil bubble is full of oil. If the oil is not enough, you need to press the carburetor until the oil is full. It is best to press the carburetor every time you use it. Please replace the air filter sponge after 36 hours of continuous operation to avoid damage to the engine cylinder. 2. Please clean up the oil in the carburetor if it is not used for a long time. The carburetor does not need to be replaced if it can be used normally. 3. Please add lubricating oil regularly to ensure strong power. 4. Please do not touch the muffler exhaust hole to avoid scalding. 5. The mixing ratio of gasoline and engine oil is generally 25:1, but due to the difference of engine oil quality in different regions, we recommend the ratio of 20:1. Please do not use cheap inferior engine oil.