Cmple - Internal Mini SAS to SATA Cable, SFF-8087 Host to 4X SATA Target Cable Compatible with Raid Controller Hard Drive - 3.3 Feet / 1m

Pay with

Cmple - Internal Mini SAS to SATA Cable, SFF-8087 Features

• SFF 8087 to 4 SATA breakout cable, host side Internal Mini SAS 36P Male connected to motherboard or controller, 4 x SATA breakout cable connected to backplane, NOTE: Do not connect Mini SAS SFF-8087 on your backplane, otherwise the SAS to sata cable will not work with them

• High Performance: Internal Mini SAS to SATA Data cable fully exploits hardware RAID performance via serial attached SCSI (SAS) and shares performance with compatible host bus adapters through PCIe 4 lanes, support data transfer rates up to 6Gb/s per drive.

• Durable and Flexible - Woven Mesh Sheath Cover for easy routing. Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity

• Easy Identification: P1 to P4 cables are labeled provide easy to route after installation, it is the good choice for DIY and professional installers

• Package Includes: 1 x Mini SAS 36 Pin (SFF-8087) Male to 4 SATA 7Pin Female Cable, Mini SAS Host/Controller to 4 x SATA Target - 3.3 Foot / 1m

About Cmple - Internal Mini SAS To SATA Cable, SFF-8087

SFF-8087 to SATA Breakout Cable – 3.3 Feet (1m) The cable is 3.3 ft (1m) in length and features a mini-SAS SFF 8087 connector at one end and 4 Sata connectors at the other. This Mini SAS (SFF-8087) to 4x SATA Cable, SFF-8087 is host, connect to the motherboard or RAID Controller with Mini SAS ports. 4x7Pin SATA is the target, connect to the hard drives with SATA port. Cmple SFF 8087 Mini SAS to SATA Cable is SAS RAID controller to SATA hard drive cable. Our Mini SAS controller to SATA target cables designed with labels (P1, P2, P3, P4) for you easy setup, locking connector latches provide stable connection. Ideal for DIY projects or for professional installers, both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs. This 3.3 feet cable harness of SAS to SATA cable provides sufficient length for internal cable management; Slim ribbon cables minimize airflow impact in a computer case Specifications: Cable Length: 3.3 FT / 1 m Connector 1 4 x 7-Pin SATA Male, Latched Connector 2 1 x 36-Pin Mini-SAS (SFF-8087) Male Interface SAS-2 6 Gb/s Wire Gauge 30 AWG Please note: Pair with a 4 port SATA to power splitter cable to provide power to the drives.