We specialize in hard to find items
All Categories
5pcs 30mm Length Extruder 1.75mm Tube and 5pcs 0.4 mm Brass Extruder Nozzle Print Heads 2pcs Cleaning Drill Bits for MK8 Makerbot Reprap 3D Printers
Share Tweet
About 5pcs 30mm Length Extruder 1.75mm Tube And 5pcs 0.4
To avoid leaks and breaking the tubes: 1. Remove the old nozzle and throat. 2. While the hot end is cool, insert the new throat (teflon side toward the nozzle) and nozzle and finger tighten them. Be sure to leave some threads visible on the nozzle end so it can tighten further. 3. Heat the hot end up to the temperature you normally print at. 4. While (carefully) holding the hot end with some pliers, tighten the nozzle against the tube. Nozzle Throat Material : Stainless Steel Outer Thread : M6 Nozzle Throat Outer Diameter:7mm Nozzle Throat Inner Diameter:4mm Teflon Pipe Inner Diameter : 2mm Length : 30mm Filament Diameter : 1.75mm Brass Nozzle: Material: brass Size: 5*13mm Input Diameter: 1.75mm Output Diameter: 0.4mm Drill Cleaner Material: silicone+steel Bit diameter: 0.4mm The bit length: 8mm The length of shank: 20mm Package include: 5 x 3D Printer Nozzle Inputting Tube 5 x 3D Printer Extruder Brass Nozzle Print Head 2 x Drill Bits
