OMRON E3JM-DS70M4 Built-in Power Supply Photoelectric Sensor Relay output NN

Pay with

About OMRON E3JM-DS70M4 Built-in Power Supply

[Shape] Square type [Sensing method] Diffuse-reflective [Sensing distance] 700 mm (White paper 200 x 200 mm) [Differential distance] 20% max. of sensing distance [Light source] Infrared LED (Emission wave length: 950 nm) [Power supply voltage] 12 to 240 VDC +/-10% (ripple (p-p) 10% max.)24 to 240 VAC +/-10% 50/60 Hz [Power consumption] 2 W max. [Control output] Relay output (SPDT)5 VDC 10 mA min./250 VAC 3 A (cos Phi=1) max. [Life expectancy (relay output)] Electrical: 100 thousand times or more (switching frequency 1800 times/hour)Mechanical: 50 million times or more (switching frequency 18000 times/hour) [Operation mode] Light-ON/Dark-ON selectable [Response time] 30 ms max. (Operate or reset) [Sensitivity setting] Single-turn adjustment [Ambient illuminance] Incandescent lamp: 3000 lux max. [Ambient temperature (Operating)] -25 to 55 deg.C(with no icing or condensation) [Ambient temperature (Storage)] -30 to 70 deg.C(with no icing or condensation) [Ambient humidity] Operating: 45 to 85%Storage: 35 to 95%(with no icing or condensation) [Insulation resistance] 20 M Ohm min. at 500 VDC [Dielectric strength] 2000 VAC at 50/60 Hz for 1 min [Vibration resistance] 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions [Shock resistance] 500 m/s**2 for 3 times each in X, Y, and Z directions [Degree of protection] IEC: IP66 [Connection method] Terminal block models [Indicator] Light indicator (red) [Weight (packed state)] Approx. 160 g [Material] Case: ABSLens: Methacrylate resinCover: PolycarbonateMounting Bracket: Iron [Accessories] Instruction manual, Mounting bracket, Nut, Terminal protection cover, One set of cable connection nuts(1)