Zoeller Waste-Mate 267-0002 Sewage Pump, 1/2 HP Non-Automatic – Heavy-Duty Submersible Sewage, Effluent or Dewatering Pump

Pay with

Zoeller Waste-Mate 267-0002 Sewage Pump, 1/2 HP Features

• Zoeller Waste-Mate 267 is a heavy-duty submersible sewage, effluent, or dewatering pump with 1/2 HP

• Ideal for residential & commercial use; Passes 2" spherical solid waste with plastic impeller

• Switch-operated sewage pump with a 2-pole mechanical switch & non-clogging vortex impeller design

• Durable cast engineered construction utilizes ASTM Class 25 cast iron for switch case & pump housing

• Constructed in the USA with a limited 3 year warranty

About Zoeller Waste-Mate 267-0002 Sewage Pump, 1/2 HP

Product Description 115-Volt 1/2 Horse Power Model N267 Waste-Mate Non-Automatic Cast Iron Single Phase Submersible Sewage/Effluent Pump. If the Pump operates but delivers little or no water - Check strainer housing, discharge pipe, or if check valve is used vent hole must be clear. Discharge head exceeds pump capacity. Low or incorrect voltage. Incorrect motor rotation. Capacitor defective. Incoming water containing air or causing air to enter pumping chamber From the Manufacturer Zoeller's Model N267 Waste-Mate Cast Iron Submersible Sewage/Effluent Pump features an engineered, non-clogging, plastic vortex impeller with metal inserts. The pump housing and base are made of ASTM Class 25 cast iron. This pump is not effected by materials normally found in drainage and sewage pumps. It features an oil filled, hermetically sealed motor and oil lubricated bearings. The motor features automatic reset thermal overload protection. The Waste-Mate has a corrosion resistant powder coated epoxy finish. The pump also includes a watertight neoprene square ring and gasket. The pumps screws, bolts, handle, guard, arm, and seal assembly are all made of stainless steel. The pump also features a carbon and ceramic shaft seal. It has a 2-Inch female and a 3-Inch NPT male discharge. The N267 is watertight and dust tight.