JBD EMPIRE - Acuity Instruments ESCO-Insulated Shift Knob in White (M10X1.5) (Manual Transmission Only) (1947-WHT)

Pay with

JBD EMPIRE - Acuity Instruments ESCO-Insulated Features

• Insulated design is gentle on the hand in harsh hot/cold climates

• Stainless steel core for added weight and strong, durable threads

• Durable, hand-filled 6-speed Honda gear pattern is 2+ millimeters deep and will not wear off like printed lettering

• ESCO shape fits great in the hand with a 40mm diameter and 70mm height and is heavier than most insulated knobs at 185 grams

About JBD EMPIRE - Acuity Instruments ESCO-Insulated

Acuity Instruments ESCO-Insulated Shift Knob in White (M10X1.5) (Manual Transmission Only) (1947-WHT) Contents (1) ESCO-Insulated Shift Knob (1) Stainless steel flange nut (1) Suede storage bag The ESCO-Insulated is the rebirth of ACUiTY's original ESCO shift knob design and lends its beauty to a careful combination of handcrafted lettering and finishing techniques and modern multi-axis CNC machining. With a 40mm (1.57 in) diameter, barrel-shaped upper portion, gently domed top, tapered bottom, and 70mm (2.7 in) total height, the ESCO-Insulated fits beautifully in most drivers' hands. Because of its stainless steel core, the ESCO-Insulated is heavier than all-plastic insulated designs and has a finished weight of 185 grams (6.5 oz). Each knob also includes a custom-made stainless steel flange nut that can be used to retain the shift knob. If you are using the OEM shift boot collar or one of ACUiTY's 1924 shift boot collars, you will not need to use this flange nut during installation. Important Note About Shift Boot Fitment: On many Hondas and Acuras made after 2010, the shift boot clips to the underside of the shift knob. Older vehicles had a shift boot that just sat near the underside of the knob, but did not mate to it. If your shift boot clips to the underside of your shift knob, you should check to see if it clips to a nut or to the knob itself. If the boot clips to a nut, your boot and nut should work with your new Esco knob as well. If the boot clips to the actual OEM shift knob, however, you will need additional parts to prevent the boot from sagging after installation. We currently offer 5 shift boot collars that can correct this issue. If you have an older vehicle that doesn't have a shift boot that clips to the knob, you can also use the same shift boot collars (1924-K1, 1924-K2, 1924-K3, 1924-K4, and 1924-K5) to clip the boot to the knob for a more modern, clean, finished appearance.