RaceWax Dual Edge Kit 70Dx3 Ski Base-Side Tool +Diamonds +Gummi & More

Pay with

RaceWax Dual Edge Kit 70Dx3 Ski Base-Side Tool Features

• Professionally sharpen ski and snowboard edges with the Swix base-side angle edge tool. Dial a precise side angle from 0 degree to 5 degrees and base angle of 0.5 to 1.0 degree. Nine angles total. High quality Swiss-made ICECUT included (80 mm).

• NOTE: 80 mm is the maximum length file or stone that will fit into this tool. 70- or 80-mm stones are recommended. Includes RaceWax 70 mm diamond stones, a Swix deburring gummi stone, brass brush to clean your files, and ski brake retainers.

• RaceWax Diamond Stone Set, Three Stones, 70 mm x 25mm: BLACK (X-Coarse)= offers best cutting action (240 grit); BLUE (Coarse)= for routine edge maintenance and sharpening (360); RED (Fine)= for deburring and edge polishing (500).

• One Swix gray Gumi or Gummi Stone for prepping an edge, deburring as the final step in edge sharpening, or detuning. File cleaning brush for removing metal filings from grooves. Measures 3.25 x 0.6 x 0.4 inches. Ski brake retainers: two large ski shop quality bands.

• Detailed instructions with links to video help.

About RaceWax Dual Edge Kit 70Dx3 Ski Base-Side Tool

Never lose your edge with the RaceWax Dual Edge Kit - Everything you need to professionally sharpen ski and snowboard edges. Side and base edge bevel multi tool (does both sides) that includes a metal file as well as a set of 3 different grit RaceWax diamond stones, a Swix deburring gummi stone, brass brush to clean your files, and ski brake retainers. Dial a precise side angle from 0 degree to 5 degrees and 0.5 to 1.0 degree on the base. Nine angles total. High quality Swiss-made ICECUT included (80 mm). NOTE: 80 mm is the maximum length file or stone that will fit into this tool. 70- or 80-mm stones are recommended. One Swix gray Gumi or Gummi Stone for prepping an edge, deburring as the final step in edge sharpening, or detuning. RaceWax Diamond Stone Set, Three Stones, 70 mm x 25mm: BLACK (X-Coarse)= offers best cutting action (240 grit); BLUE (Coarse)= for routine edge maintenance and sharpening (360); RED (Fine)= for deburring and edge polishing (500) It is recommended that you set the edge bevels with the file and then replace the file with diamond stones to maintain the sharpness; if you always use the metal file, you will wear away the edge. Bonus Benefit for this tool: If you don't know what base and side angles your ski/board are set to, this tool can help you find them. Before you start mark the metal edge with a sharpie, start the tool at the lowest angle and see if it removes the marking on your edge. Raise the angle step-wise and repeat until it removes the mark. That is your angle! Record the base/side angles for future reference. File cleaning brush for removing metal filings from grooves. Measures 3.25 x 0.6 x 0.4 inches. Ski brake retainers: two large (color may vary) ski shop quality bands. Detailed instruction card with links to video help.