Fisters DIY 100W Panel-40pcs 5x5 Mono High Power Solar Cells Kit w/Tabbing Bus Wire Flux

Pay with

About Fisters DIY 100W Panel-40pcs 5x5 Mono High Power

Specification: 1.Solar Tabbing Wire： Gauge:0.12mm Width: 2mm T of copper : 0.1mm T of Tin : 0.03mm Width range : ±0.1 Thickness error: ±0.01 2.Bus Wire： Gauge:0.2mm Width: 5mm T of copper : 0.1mm T of Tin : 0.03mm Width range : ±0.1 Thickness error: ±0.01 3.Flux Pen： No clean flux pen No lead for environment friendly Can be refilled No hurt of your skin Easy your solar panel DIY It is fun to use 4.Average Power (Watts): 2.6Wp Average Current (Amps): 5.2Imax Average Voltage (Volts): 0.5 Vmax Effeciency: 16.64% What you must know about solar panel DIY: DIY material list: 1. solar cells (any size, 6" 3"x6" 5", any other cutted size) 2. tabbing wire (connecting all the solar cells in serise, to solar array .we call it is bridging so the power current can go through smoothly) 3. bus wire( connecting all the solar cell array to a whole solar panel, we call bussing) 4. Flux pen ( To help the tabbing wire and bus wire are soldered well onto the solar cell) 5. Encapsulation kits (A&B), when you connected all the solar cells well, you need to use encapsulation or glass to protect the solar cell, the solar cell is fragile and easy oxidized, encapsulation kits protect the solar cell from oxyging and broken) 6. Diode ( anti the power current go back to GEL battery at night) 7. Aluminum frame, if you use glass for encapsulation ,you need to framing solar panel. Package included 40pcs 5x5 inch 125x125mm Monocrystalline Solar Cells 131feet Tabbing Wire 16feet BusWire 1 Flux Pen