3-in-1 Electric Creasing Machine, Electric Paper Creaser Perforator Cutter, Electric Paper Folding Creaser w/Sawtooth Perforating Die Cutting Die Paper Pressing Rollers Max Feed Width 18”

Pay with

3-in-1 Electric Creasing Machine, Electric Paper Features

• 3-in-1 Function: It Is Equipped with One Sawtooth Perforating Die, One Cutting Die, Two Rubber Rollers for Paper Pressing, and Two Creasing Dies, Which Can Achieve Single/Double Creasing, Cutting, and Dash Work.

• High Efficiency: for Business Cards, Photos, Greeting Cards, Color Pages, Covers, Etc., It Can Finish One or More Folds at a Time, so It Greatly Improves the Working Efficiency.

• High Precision: It Adopts the Way of Paper Walking by Pressure Wheel, so the Paper Walking Is Not Shifted. This Effectively Avoids the Trouble

• Dotted Line Knife Holder: It Has a Dotted Line Knife Holder, and Can Also Cut the Dotted Line of the Document Ticket. It Can Be Said to Be Multi-purpose.

• Double Spiral Design: the New Double Spiral Design Makes the Knife Holder Fixed More Stable and Positioned More Precisely, Thus Improving Working Accuracy and Safety.

About 3-in-1 Electric Creasing Machine, Electric Paper

Specification Model: Qy-h500 Material: Mechanical Steel Color: Silver Max Feed Width: 460mm/18inch Creasing Mode: Round Creasing Technology, Longitudinal Creasing, Unlimited Length Number of Paper Creasing Wheels: 2 Groups Number of Creasing Wheels: 2 Groups Dashed Knife Configuration: 1 Group Number of Slitting Knives: 1 Group Power Supply: 110v, 60hz Package Size: 58.5*27*24.5cm/23.03*10.63*9.65in Gross Weight: 10kg/22.05lbs Net Weight: 9.7kg/21.38lbs How to Use 1. Plug in the Correct Power Supply, Turn It on and See If the Machine Is Running Properly. the Socket Comes with a Spare Fuse. 2. Select Different Creasing Lines As Required. Use the Tool to Adjust the Position. the Center of the Creasing Wheel Should Be Right in the Center of the Creasing Groove. 3. Check the Scale According to the Paper Size and Indentation Position. 4. Adjust the Left and Right Side Gauges. 5. Place the Trial Paper. Turn on the Power and Push the Paper over the Creasing Wheel. Adjust the Pressure As Required. Pay Attention to the Thickness of the Paper. Too Much Pressure Affects the Life of the Motor. 6. When All Is Ready, Push the Paper into the Platen to Start Working. 7. Press the Dotted Line to Replace the Corresponding Indentation Wheel or Knife Holder Installed. Adjust Certain Pressure. A - Tool Holder Positioning Screw: Loosen the Screw, the Tool Holder Can Be Moved Left and Right to Achieve Different Sizes of Work B - Creasing Knife Depth Adjustment Screw: Adjusting the Screw Can Realize the Switching of Different Creasing Methods and Also the Depth Adjustment of the Creasing Line C - Creasing Slot Positioning Screw: Loosen the Screw, with the Tool Holder to Move Left and Right Package Included 1*Electric Creasing Machine 1*Power Cord