Manual Carton Closing Stapler, 1-3/8-Inch Crown, 3/4-Inch Length Carton Staples, Corrugated Box Stapler with 100 Staples for Closing Cartons Folding Boxes

Pay with

Manual Carton Closing Stapler, 1-3/8-Inch Features

• 【Manual Carton Closing Stapler】This carton closing stapler does not need to drive with an air compressor, convenient to use. It can contain 50 staples for one time, which can avoid frequent adding staples and support continuous work. The ergonomic long handle allows you to use this product for a long time without hand soreness.

• 【Strong and Durable】Made of high-quality iron and aluminum with high hardness and strength, it can resist wear, corrosion, shock, and deformation. Meanwhile, the stapler outlet is made of high-quality steel with a quenching process, making it more durable.

• 【Works for Cartons in Different Thickness】You can turn the adjusting bolt clockwise/counterclockwise to make the clip loose/tight. Besides, the adjusting rod can be lifted and swung left and right to adjust the penetration depth (D: deep S: shallow), making it suitable for different carton thickness.

• 【Attached Pusher & Staples Puller】 When you nail the staple in the wrong position, you can use this small puller to pry it open. And the staples pusher with a new structure is easy to operate and has good stapling effect.

• 【Hassle-free Installation】The simple structure, complete accessories, and a manual allow you to install the staples in a few simple steps. It is lightweight and compact (12*3.15*10.5inch), allowing you to easily store and carry it. It is suitable for all kinds of sealed boxes, cartons, closed corrugated cardboard, etc.

About Manual Carton Closing Stapler, 1-3/8-Inch

Specification Color: Yellow, Black Material: Iron, Aluminum, Rubber, Steel Style: Modern Surface Treatment: Quenching Process Number of Staples: 100 Capacity: 50pcs Operation Mode: Manual Feature: Adjustable Gross Weight: 2.75kg/6lbs Product Size: 30.5*8*26.7cm/12*3.15*10.5inch Staples Crown: 34.7mm/(1-3/8inch) Staples Leg Length: 18mm(3/4inch) Staples Width: 2.3mm/(0.091inch) How to Install Staples 1.Pull the staples pusher to the end. 2.Put the staples into the slot. 3.Place the staples shaft. 4.Press and hold the rear fixed shrapnel to push forward. 5.Fix the shrapnel. 6.The installation is complete. Package Included 1* Carton Stapler 1* Staples Pusher 1* Staples Puller 100* Staples 1* Chinese Manual All Accessories for Assembly Notes 1. Please wear safety goggles and earmuffs during operation to ensure safety. Please do not aim the product at your body to avoid injury. 2. Please select the staples specification correctly to avoid jamming and other damages to the tool. 3. When the tool is stopped or repaired, be sure to take out the remaining staples in the clip. 4. The machine can only be used for plane sealing, not for three-dimensional sealing and side sealing. Due to the working principle, there will be small holes on both sides of the sealing points. 5. During operation, the sealing surface of the carton should be stabilized, and the machine should be close to the carton surface, otherwise it is easy to appear invalid operation. 6. This product doesn't include fasteners in the package. Please prepare it in advance if needed. 7. Please read the manual completely before use, and pay particular attention to the safety instructions included.