Lectrosonics Digital Hybrid Wireless UHF Belt Pack Transmitter with Fixed Antenna, 470.100-537.575 Frequency, 50mW RF Power, 76.7MHz Bandwidth, 2 AA Batteries

Pay with

About Lectrosonics Digital Hybrid Wireless UHF Belt Pack

The Lectrosonics Digital Hybrid Wireless UHF Belt Pack Transmitter with 470.100-537.575 Operational Frequency can be configured to operate as a "one touch" device with a single power on/off switch on the top panel or with full access to all operational parameters using the side panel membrane switches and LCD interface. The top panel switch can also be configured to provide a mute or talkback function. This versatility makes the transmitter at home in a wide variety of applications from video production to theater, stage and house of worship. Frequencies are selectable in 100 kHz or 25 kHz steps across a maximum tuning range of 76.7 MHz. This yields a total of 3072 available frequencies across three standard frequency blocks. The tuning range varies in other blocks to meet applicable frequency allocations. The servo bias input accepts mic or line level signals with a wide range of gain adjustment in 1 dB steps. Accurate LED indications on the top panel and a bar graph indicator on the LCD allow precise gain adjustments to be made for the maximum signal to noise ratio and minimum distortion. The limiter in the preamp can cleanly handle signal peaks over 30 dB above full modulation, allowing the input gain to be set high enough to achieve the maximum signal to noise ratio. Compatibility with earlier analog Lectrosonics receivers, Lectrosonics IFB receivers and some receivers from other manufacturers is provided by DSP emulation modes selected in the LCD menu.