We specialize in hard to find items
(3)
Paint Thickness Gauge Crash Test Meter F&NF Tecpel TG-902
Share Tweet
About Paint Thickness Gauge Crash Test Meter F&NF Tecpel
Includes battery, calibration disks, instructions and leather belt case This model works with Non-Ferrous material such as Aluminum, as well as ferrous/steel/iron base metals. It does not work with plastics though. These are typically used by auto detailers to check thickness of paint prior to sanding/buffing etc, and by car dealers to check the relative thickness of the paint from panel to panel, thus indicating if the vehicle has been repainted at any time. Specification: Measurement Range - 0-40 mils/0-1000 μm Accuracy - ±4 digits on 0 to 7.8 mils ±10 digits on 0 to 199 μm ±(3% + 4 digits) on 7.9 - 40 mils ±(3% + 10 digits) on 200 - 1000 μm Temperature Coefficient - ±0.1% of reading change in accuracy per degree change in ambient operating temperature above 82.4° F or below 64.4° F Auto power-off after 30 seconds Response Time - 1 second Battery Requirement - 9V Calibration Plate - 2" diameter steel disc Gauge Controls - Calibration, Up-arrow, Down-arrow, Back Light, and mils/um
