Tanice TDS Meter Digital Water Tester TDS EC Temperature ppm Meter Range at 0-9990 with Color Change Function Water Purity Test for Drinking Water, Aquariums, Hydroponics

Pay with

About Tanice TDS Meter Digital Water Tester TDS EC

Features: 1. This is a digital TDS meter tester to test the filter water quality purity, to check the performance of your water filter, to check for hardness (1grain=17ppm), to make sure you always drink pure water. Saves measurements for convenient reading and recording New Arrival 2. Auto-off function: turns off meter after 5 minutes of non-use to conserve batteries 3. Automatic temperature compensation 4. Shift between TDS and Conductivity 5. Can be used in: Water purifiers and filters, food (vegetable, fruit) &drink quality monitoring, pools and spas, aquarium, hydroponics Drinking Water Standard: TDS≤40, the backlight display is green, Water is qualified to drink directly TDS>40, the backlight display is red, Water is non for drinking Specifications: 1. Measurement range: TDS: 0-9990ppm (accuracy ± 2% F.S); Conductivity: 0-9990us/cm; Celsius: 0.1-80.0°C (Accuracy ± 0.1°C); Fahrenheit: 32.0-176.0°F. 2. Size: 6.33 x 1.12 x 0.59 inches(161mm*28.5mm*15mm) 3. Color: Yellow How to use it: 1. Please unplug the electrode sleeve before use. 2. Press the switch, place the electrode into the test solution. 3. After the numerically stable, press the HOLD button and take it out of the solution to read. 4. After reading, turn off the meter, wipe clean the electrode before sleeving it. Note: If it always shows 0 ppm when you put the tester in the water, don't worry, because the item need to reset before using. Please open the battery cover, push the battery in and test again. Package include: 1 X Water Quality Tester 1 X User Manual 1 X Free Leather Bag