X

Blacklight LED Wave Ripple Flicker Special Effects Lighting kit for Props Scenery Fluorescent Paints

Product ID : 36862783


Galleon Product ID 36862783
Model
Manufacturer
Shipping Dimension Unknown Dimensions
I think this is wrong?
-
Restricted product. We cannot ship these kind of products

Pay with

About Blacklight LED Wave Ripple Flicker Special Effects

This unit is a professional blacklight LED wave ripple flicker simulation light source for building props, scenery and costumes. When the control is set to the faster speeds a flicker for flame effects can be achieved. The kit is operated from 8 AA batteries, and runs for more than 12 hours on new alkaline batteries (not included). The cable socket assembly can be press fit into a 7/16" hole drilled into rigid foam, wood or other material. The taper of the socket body locks it into place, and the socket has a front flange to limit the insertion depth and provide a finished appearance. The WEC (Wave Effects Control) functions are as follows: The Light button is used to set the control to static dimming mode. The Speed (On/Off) button provides 20 speeds. In the static dimming mode this button provides dimming in 12 steps, 10% - 95%. This button is also used to turn the unit off when it is held longer than 3 seconds. The control retains the last settings when turned off. The Mode button provides six dynamic effects, and dimming: 1. Wave / Ripple (Shallow) 2. Wave / Ripple (Storm) 3. Wave / Ripple (Average) 4. Wave (Rough Surf) 5. Wave (Storm Swells) 6. Wave (Deep Swells) 7. Static dimming This kit consists of a Wave Effects Control (WEC1) with 6 different wave and ripple modes, a blacklight bi-pin LED lamp with socket assembly (EEL1-SBL2-BL), and a 12-volt battery holder (BHC1-8AA-12V). The LED black light bulb operates from 12 volts DC at 125ma nominal current, 1.5 watts. The bulb is molded of clear silicone rubber and has a maximum current of 185ma at 12 volts (2.3 watts) when warmed up. The blacklight bulb uses 24 LEDs with ultraviolet UV-A 390nm to 395nm nominal wavelength peak. Applications include: Creating unique water and flame effects when used for illumination of fluorescent paints and fluorescent acrylic sheet plastics Theatrical costumes and props Theme park character costumes Blacklight art Ocean sea theming effects Escape rooms