12V RF Wireless Remote Control Switch 10A Universal 4-Channel 433MHz Remote Relay Switch for LED Lamp, Lights, Motor, DIY Function & More (4 Transmitters with 1 Receiver)

Pay with

12V RF Wireless Remote Control Switch 10A Universal Features

• Easy & Convenience: Wireless control, easy to install. We have made transmitter and receiver working together and test it before ship it,when you get it just need install it.

• Wide range of uses: the wireless remote control switch can control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances

• Perfect Design: One/several transmitters can control one/several receivers simultaneously. If you use two or more receivers in the same place, you can set them with different codes. If you use multi-button transmitter, you can control the controller with different buttons, it wont affect each other.

• Diversified working methods: Adjustable working way, control equipment turn/reverse, on/off. Switch Self-lock, Jog, Inter-lock.

• Advantage: The wireless receiving controller, with high confidentiality, stable performance, low power consumption characteristic, jump line or dial the code switch coding. This switch can learn different coding remote controls (such as 2262,1527 ect.)

About 12V RF Wireless Remote Control Switch 10A Universal

About Receiver: Model No.: AK-RK04S-12-B 1. Working voltage: DC12V 2. Quiescent condition: Less than 6mA 3. Working temperature: -40 Degree +80 Degree 4. Receiver sensitivity: more than -105dBm 5. Working frequency: 433mhz 6. Output voltage: DC and AC is optional 7. Output current: Less than 3A 8. Max load current: 20A 9. Size: 7.2 x 5.2 x 2.6cm About Working way: Working way changed by jumper on pins Momentary: jumper doesn't connect any two pins. Relay: Press and hold -> On; Release -> Off. Toggle: jumper connects the pin T and pin S. Relay: Press -> On; Press same button again -> Off Latched: jumper connects the pin L and pin S. Relay: Press -> On; Press other button -> Off. About Learning and clearing Method: Learning: Press learning button, the indicator OFF, loosen finger, press any button of the remote transmitter, indicator flashes three times, meaning learning succeeds. Clearning: Hold press learning button about 8 seconds,,indicator from OFF to ON,then press remote ,Relay did not Respond ,it means clearning code successful. About Transmitter: Buttons: 4 Buttons Working Voltage:DC6V (2PCS CR2016) Operating frequency :433MHz Remote Distance: 20-50M Operating Current: 13 mAh Encode: Fixed code / EV1527 code Size: 5.7 x 3.2 x 1.1cm Package Includes 4 x Transmitters 1 x Receiver 1 x User Manual