3 5/8" Nail in Place Post Cap (for 4x4" Wood Post) Box of 16

Pay with

3 5/8" Nail in Place Post Cap Features

• Use for 4" Wood Posts (3 1/2" x 3 1/2" actual) Total Height: 1.25"

• Protect your investment! Current pressure treating often does not reach the center of the post. An exposed wood top allows rotting to begin faster than usual.

• Take time to measure your post not all 4x4 post are the same dimension. These black fence post caps are for a standard 4X4 wood fence post (3.5"x3.5") this cap measures 3 5/8"x 3 5/8.

• The hole is 1/8” or 0.125” so a 6D or 11 gauge nail 2 inches long should be fine.

• Made in USA Easily Nails or Screws on. Do not use glue like others recommend for their caps. It will flex, crack, and break,

About 3 5/8" Nail In Place Post Cap

Quick OverviewMake sure your post caps are secure! These black nail in place post caps are made from sturdy polypropylene and are made to fit 4" wooden posts.Details Make sure your post caps are secure! These black nail in place post caps are made from sturdy polypropylene and are made to fit 4" wooden posts. Designed and manufactured by LMT. Features: Fits: 4" Wood Posts Total Height: 1.25" Corner Radius: 0.031" Extends 0.438" Over The Profile Maximum Profile Dimensions: 3.800" All of our post caps are made to fit posts of their respective size. For example, a 3-5/8" post cap will fit a 3-1/2" post (outside diameter) Lumber 4x4's are actually 3.5x3.5", A 4" post cap will only fit a 4" post (outside diameter), and so forth. The hole is 1/8” or 0.125” so a 6D or 11 gauge nail 2 inches long should be fine. A #4 screw will work but it can be hard to reach and install a screw on the top of a post.Additional InformationSKULMT1621BColorBlackSize3 5/8" (4" Wood)StyleNail-InManufacturerLMT Mercer GroupConditionNew