We specialize in hard to find items
All Categories
VIPMOON 10 Pack 10mm 4pin L-Shape 5050 RGB LED Strip Connector Right Angle Corner Connector for 5050 RGB LED Strip Lights
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About VIPMOON 10 Pack 10mm 4pin L-Shape 5050 RGB LED
About VIPMOON: Focus On Indoor and Outdoor LED Lighting with Rich Lighting Experience. Only Offer for Professional and Advanced LED Lighting Product. Installation Instructions: 1.Ensure your section of LED light strip is 10mm wide RGB 5050 LED strip and has four contacts (+, B, R and G) and all the contacts are dry and clean. 2.Open the white clasp of the connector. 3.If you have a waterproof LED strip, you should peel off silicon on the surface around soldering/Cutting line area, then insert the LED light strip into the clasp, with the 4 contacts of the led strip under the 4 prongs of the connector- make sure to match the + side of the strip to the + side of the clasp; If you have a non-waterproof LED strip, just insert the LED light strip into the clasp, with the 4 contacts of the led strip under the 4 prongs of the connector- make sure to match the + side of the strip to the + side of the clasp. 4.Close the clasp. 5.Gently pull the LED light strip to confirm you've made a solid connection. 6.Your connection is successfully made! Notice: If the connection is loose, the LEDs will either flicker or do not light up. To ensure good connection, please follow these 2 tips: 1. The L-shaped PCB board is removable and detachable, please move it to the right place to ensure good electrical conductivity. 2. After you have inserted the LED strip into the connector, before you close the cap of the connector, please slightly pull and push the LED strip to adjust the connection point, until you see the LEDs light up. If the LEDs do not light up, please use your finger to press a little hard on the 4 metal contacts in the connector, until you see the LEDs light up. Package Included: 10 x 10mm L-shape Connector for 5050 RGB LED Strip Light
