All Categories
Model :HFS-DC06-5VSize : 39.5*22.7*12mmHigh Frequency:5.8G Band:ISMInput Voltage:DC5V(Input voltage need to go through voltage stabilization, the voltage ripple can not be too big) Output Method:TTL Minimum Input Current: 30mAWiring :VCC connecting with power positive, GND with power negative, GND and OUT with TTL signal Installation Height:2-6mSensing Distance:0.5-12m AdjustableSensing Range:Right forward Cone 360° Hold Time::2-120s AdjustableFeatures : 5.8G HZ,it does not interfere with each other with the normal installation and usage, high stability, strong anti-interference ability, small volume, suitable for all kinds of DC products that need microwave Motion sensor Module.Notes:1, It is noted that the input current should be ≥30mA to drive the module. And the voltage should be stable without big fluctuation. Otherwise, it will cause continuous trigger (the load lamp may be continuously triggered by itself or couldn't be went out);2, For its working properly, avoiding being installed in the side of a large area of metal , avoiding being put in a completely closed metal shell.