Cutech 40700H 12-1/2-Inch Spiral Cutterhead Benchtop Planer with 24 Tungsten Carbide Inserts, Single Speed Feed Rate, Snipe Minimizer, and Board Return Rollers

Pay with

Cutech 40700H 12-1/2-Inch Spiral Cutterhead Features

• Snipe Minimizer - Cutech's 4 lead screws and patented coupling design automatically minimizes snipe. No need for the additional snipe lock to get the same results.

• Depth of Cut Indicator - Handy scale on the front of the planer shows how much material is taken off with each pass.

• Board Return Rollers - Send boards back to the front for the next planing with the newly added rollers on top of the machine.

• Repeat Cut Depth Stop - Comprehensive 8 positions Depth Stop for ease of thicknessing a batch of board to the same size.

• Versatile Flip Dust Hood - Flip it up and let the sawdust naturally blow out the back or flip it down to attach a dust collector for optimal chip removal.

• Board Return Rollers - Send boards back to the front for the next planing with the newly added rollers on top of the machine.

About Cutech 40700H 12-1/2-Inch Spiral Cutterhead

The small and mighty 40700HC benchtop planer may be diminutive in size but housed inside is a powerful 15-AMP motor with a cutterhead speed of 10,000 RPM. When lugging around an overweight planer won't do, the 56 lbs 40700HC planer can handle boards up to 12-1/2” wide and 6" thick. Like its big brother, this guy has the same spiral cutterhead with 24 indexable 2-sided inserts to ensure a smooth finish time after time. The new board return rollers make transfering the board back to the front a breeze.