All Categories
Why Microwave Motion Sensor, not PIR? PIR sensor activated by infrared, heat and light. Sensitivity is lower when background temp. Reaches 37℃. Vulnerable to dust and smoke. It also can not pass through plastic, glass cove. Lens gets aging, and as time goes on, the reaction will be more and more sluggish. Microwave motion sensor activated by motion and speed, no lens, do not worry about lens aging or dust and smoke detection because it can be detected through plastic, glass and thin non-metal materials, always functioning regardless of the background temp. Smart sensor automatic turn on lamp only on your need 1.Ambient lux level is above preset daylight threshold, the lamp does not switch on. 2.Ambient lux level is below preset daylight threshold, When nobody or no objects move, the lamp does not switch on When somebody or others move, the lamp will turn on, if there is no more movement , the light turns off automatically after hold-time preset. Specifications: Operating Voltage: 120-277Vac, 50Hz/60Hz Max. Load: 200W@120Vac, 400W@277Vac-Ballast; 400W@120Vac, 800W@277Vac-Resistive HF System: 5.8GHz+/-75MHz, ISM wave band Power Consumption: less than 0.5W(standby), less than 1W(operation) Transmitting Power: less than 0.5mW Detection Zone Max.(D x H): 16m x 12m Motion Detection: 0.5~3m/s Hold Time: 5s/30s/90s/3min/20min/30min Detection Sensitivity: 25% / 50% / 75% / 100% Daylight Sensor: 5lux / 10lux / 30lux / 50lux / 100lux / 150lux / Disable Detection Angle: 150(wall installation) 360(ceiling installation) Operation Temperature: -20C~60C IP Rating: IP20 Life Time: 50,000 hours Package Includes: 1pc Motion Sensor Light Switch 1pc Product manual