uDecor DuraClean Smooth White 2x4 Vinyl Ceiling Tile - Box of 10 - Washable, Fire-Rated, PVC

Pay with

uDecor DuraClean Smooth White 2x4 Vinyl Ceiling Features

• COMMERCIAL KITCHENS, BASEMENTS & MORE - Class "A" Fire Rated, FDA and USDA compliant (most health inspectors love them!). The smooth, washable vinyl (PVC) surface is perfect for food prep areas, manufacturing facilities, basements, and more.

• WATERPROOF - Goodbye, water-damage! The DuraClean is waterproof and easily washable with warm water and a mild detergent. No more replacing tiles that get wet or dirty. Great for areas with moisture concerns or high humidity.

• NOT ACOUSTIC ♦ Smooth PVC ♦ 0.16" thick (5/32" or 4 mm) ♦ Grid mount only (do not glue or staple up) ♦ 25 Year Warranty ♦ 47.75" x 23.75" ♦ Solid white (not translucent) ♦ Recyclable #3 PVC

• RIGID & DURABLE - While lightweight (only 4lb), the 0.16" PVC tile will sit solidly in your grid for many years. They can support the weight of R13 insulation or a single LED puck light.

• EASY DIY INSTALLATION - Designed to drop into standard 15/16" grids (the width of the grid as you look up). Like most tiles, these will not work with thinner 9/16" grids. Flexible enough to install with zero clearance in surface mount grids. EASY TO CUT - just score with a utility knife and snap.

About UDecor DuraClean Smooth White 2x4 Vinyl Ceiling

Our DuraClean tiles are made from UV Stabilized 1/8" (.125") thick vinyl plastic. This durable tile is perfect for industrial and commercial areas like; bottling and food processing plants, food preparation areas, schools, dorms, daycare, and educational facilities. Constructed from 100% PVC Vinyl, our DuraClean tiles are Class A Fire Rated and can be washed over and over without any damage to them. Backed by our 25 Year ProShield Warranty, DuraClean tiles are built for a lifetime of use. This material is 100% opaque. Designed to fit all standard 15/16" - 1" T-Bar Ceiling Systems. Installation Requirements DuraClean panels can quickly and easily fit into almost any ceiling grid system. Available in the same size as any typical 2' x 2' ceiling tile, it can be the uncomplicated replacement for the tiles that are seen and found in any typical office locale. There are some grids that use a "stab and connect" system that may cause the corners of the tile to sit higher than the rest of the tile. Important! When installing DuraClean tiles in ceilings with sprinkler systems, leave at least a 1/4" gap around the edge of the sprinkler bezel to the tile. This allows the tile to fall away from the ceiling during a fire and not foul the sprinkler system. To cut any DuraClean panel, mark and score the face of the tile with a utility knife and snap it away from the cut. A skill or table saw can also be used in cutting multiple tiles at once and a RotoZip or hole-saw for odd sizes shapes and circular holes - like sprinkler heads or can lights. Use a mild soap and water solution or most household cleaners to clean the DuraClean ceiling tiles. Just spray the cleaner onto a clean rag and wipe. Power-washing DuraClean panels is also an option, but avoid placing the spray nozzle tip too close to the panel in order to prevent damage to the tile face. The tiles are unaffected by most corrosive chemicals, but you should avoid using acidic cleaners.