We specialize in hard to find items
(1)
havcybin 2.4ghz RC Controller 4CH RC Remote and Receiver Digital Radio Transmitter for 18 110 116 132 RC Car Boat Tank Crawler GA-4H-TX (Transmitter and Receiver Set), Black
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
havcybin 2.4ghz RC Controller 4CH RC Remote and Features
-
2.4G technology, FHSS 67 channels frequency-hopping spread spectrum, highly resistant to anti-jamming.
-
Compatible with a variety of vehicles, suitable for RC cars, RC boats and RC tanks.
-
Response Time:10s-12ms, Control Distance: about 200-300m.
-
Each of the 4 channels can be set respectively, supporting mixed control of 1 and 2 channels.
About Havcybin 2.4ghz RC Controller 4CH RC Remote And
Features; 1. 2.4G technology, FHSS 67 channels frequency-hopping spread spectrum, highly resistant to anti-jamming. 2. Receiver response time is 2ms, ensuring a fast response and better control. 3. Smooth and highly sensitive to control inputs and stable at distances from 200-300m. 4. Compatible with a variety of vehicles, suitable for RC cars, RC boats and RC tanks. 5. With brake and fail safe, out of control protection function. 6. Each of the 4 channels can be set respectively, supporting mixed control of 1 and 2 channels. 7. Voltage range of the transmitter. 4.8V-6V voltage warning: 8. Voltage range of the receiver. 3.3V-6V, working current 30mA, supports high voltage servos. Specifications of RC Radio Transmitters: Channels: 4 Mode Type: RC Car Boat Tank RF Power: Less than 20dbm Response Time:10s-12ms Control Distance: about 200-300m Voltage Input: 4.8V-6Vor 1.5AAAx4 Low Voltage Warning: 4.5V Net Weight: 260G Size: 180x80x145mm Specifications of Receiver: Channels: 4 Frequency: 2.4GHz; Size:16x18x12mm Package List: 1x Transmitter 1x Receiver 1x Manual Attention: batteries are not included. Boot step 1 . Connect the accessories correctly : The transmitter battery is powered and installed correctly . The receiver is not powered and the channel interface is installed correctly . The transmitter and receiver have been successfully matched to the code 2 . Turn on the transmitter 3 . Turn on the receiver power and the receiver. LED is always on 4 . Boot is complete
