We specialize in hard to find items
All Categories
OUFKAR Digital Vacuum Gauge HVAC Micron Gauge, 0-750,000 umHg(Microns) Range, 13 Units, 1/4" SAE Male Fitting Micron Meter Vacuum Tester
Share Tweet
OUFKAR Digital Vacuum Gauge HVAC Micron Features
-
【Detecting Micro Changes】 - Our digital micron gauge to accurately measure micro change of pressure in vacuum. And you can gauge the real-time pressure of the refrigeration system in vacuuming, this gathering information relevant to dehydration and cleaning foreign body (such as oil, external gas and etc.). Digital vacuum gauges HAVC parallel with vacuum pumps (making vacuum) in utilization.
-
【HIGH PRECISION】 - Our digital vacuum gauges can detect even finer changes in vacuum pressure. Measurement range is 0-750,000 umHg(micron)/ 0-100 KPa, etc. Minimum Resolution: 1 micron; Measurement Accuracy: +/- 0.1% FS.
-
【Monitoring Mode & Beep Alarm】 - Our Digital Vacuum Gauge HVAC Divided into normal and monitoring mode, Under the monitoring mode, If the current pressure is lower than the designated pressure at this time, an alarm will run. When current pressure is higher than the set pressure, the alarming will automatically disappear, or pressing any key, or automatically disappear after 30 seconds. The monitoring mode allows you to control the vacuum pressure more easily.
-
【13 Types Measurement Units】 - Our Micron Gauge HVAC have a total of 13 conversion units (mmHg, inHg, umHg, ftH2O, cmH2O, inH2O, Pa, Kpa, mbar, bar, Kg/cm², psi, oz/in²). You can convert the units according to your working requirements to cope with complex working problems.
-
【HD Backlit Screen & Calibration】 - Our HVAC micron gauge come with a high definition backlit screen that can be turned on or off with a short press of the power button, so you can take readings in sunlight. A long press on the "CAL" button will automatically complete the calibration.
-
【NOTE】 - If there is a leak at the interface, please check first if the interface is tightened; if the thread size matches our 1/4" SAE Male interface; if your access device interface threads are worn, etc. If you have any questions, please feel free to contact us
