VEVOR Top Mount Control Marine Boat Single Lever Handle Engine Control for Board Dual Action (top Mount Control Boat)

Pay with

About VEVOR Top Mount Control Marine Boat Single Lever

Universal Top Mount Marine Boat Single Lever Handle Engine Control This is a drop in replacement for Morse MT3 single engine controls. Will also work to replace the Morse MT2 single engine controls but you will need to check your fit. It does not include a start in gear switch but this can be added. This control is not made by Morse but is a perfect fitting replacement! Item Specification: Item Location: New Dimension: 455 X 157.3 X 90.7mm Weight: 2.75kg Purpose: Throttle Gear Control Open the throttle step as follows： 1. Remove the lever. 2. Unlock the throttle and pull the flexible shaft. 3. Remove the swivel bracket. 4. Loosen the two hex head screws at the link mechanism and remove the linkage. Make sure that the shift arm engagement teeth position is not changed. 5. Push the throttle arm toward the housing and rotate it 180 degrees until it bounces back. 6. Use the hex head screw to fasten the connecting rod mechanism to the desired position. 7. Insert the swivel bracket into the appropriate hole. 8. Re-install the push-pull flexible shaft and handle bar. Note: When the controller is in neutral, the neutral safety switch is in the closed state. When the controller is in the normal working condition (neutral), the neutral safety switch is in the normally open state. Package Content 1 × Marine Throttle Gear Controller