Mason MLS-500 Neoprene/Steel Machine Leveling Mount, 3" Top Diameter, 250-500lbs Capacity

Pay with

About Mason MLS-500 Neoprene/Steel Machine Leveling

This Mason MLS-500 stud-type mount levels machinery and provides vibration and shock isolation which softens impact to the structure and reduces shock to the machine frame. It has a steel transfer plate for durability and distributing loads that is attached to a thick neoprene cushion to provide a non-skid surface and maximum vibration isolation. The leveling bolt increases the height by 2" for leveling corners of a machine. The long adjustment bolt allows for passing through thick studs. This machine leveling mount is suitable for use with punch presses, brakes, shears, lathes, milling machines, and injection molding machines.SpecificationsRated capacity range250-500 lb. / 113-227 kgBase thickness7/8 inch/22 mmBolt diameter1/2 inch/13 mmBolt length4 inch/102 mmRecommended leveling1 inch/25 mmDimensions*4-7/8 x 3 x 3 inches/124 x 76 x76 mm (H x W x D)*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to backShock and vibration control products (absorbers, mounts, and pads) reduce air and structure-borne dissonance by either blocking or absorbing sound waves, or damping or isolating vibrations that cause them.  Shock absorbers, vibration damping mounts, and vibration damping pads can extend equipment life and help protect work environments, and they are most commonly used in heating, ventilation, and air conditioning (HVAC) systems or in other large machinery operations. Weight distribution determines the number of mounts or pads needed. If evenly distributed, the maximum load capacity per mount or pad should equal the tota