TODVTOO Waste Oil Burner Nozzle Waste Oil Furnace Nozzle Burner Kit Siphon Air Atomizing Nozzle Brass Fuel Full Cone Oil Spray Nozzle (4.0mm)

Pay with

TODVTOO Waste Oil Burner Nozzle Waste Oil Furnace Features

• 【1】The fuel combustion nozzle uses compressed air to rotate in the tube and mix the atomic solution impact

• 【2】Waste oil nozzles can generate tiny miniature fog particles under low pressure and low volume conditions

• 【3】The fuel nozzle can control the airflow and pressure to regulate the spray flow, angle and size particle size

• 【4】Application:Burning machine, humidity, spray, evaporation, cooling

• 【5】The fuel nozzle is in heavy oil, the waste oil burner, the viscosity of oil and other liquids is very good

About TODVTOO Waste Oil Burner Nozzle Waste Oil Furnace

Size： diameter：0.5mm,1.0mm,1.5mm,2.0mm,2.5mm,3.0mm,3.5mm,4.0mm oil inlet :1/8 inch air inlet: 1/4 inch Product Features: Under the nozzle of the low -pressure atomizer, when the low pressure is low under low pressure, the siphon air atomization nozzle is the best atomization under low pressure. Application: For diesel, heavy oil, waste oil, animal and vegetable oils, alcohol-based fuels ect, the combustion and spray workshop is widely used water and cooling system, machine clean dust, various types of industrial spray. Traffic parameters: Under 3 kg of air pressure, the flow rate of water is: 0.5mm hole: 0.74gph 1.0mm hole: 1.32gph 1.5mm hole: 2.38gph 2.0mm hole: 3.7gph 2.5mm hole: 4.49gph 3.0mm hole: 5.28gph 3.5mm hole: 6.08gph 4.0mm hole: 6.87gph Jet angle 45 degrees The above parameters are all tested with clean water, and other liquids increase or decrease according to density and specific gravity. The combustion is stable and the flame does not flicker obviously. It doesn't stick out of the burner, and the atomization is efficient and long-lasting.