Anrik 1/4 inch x 2-1/4 inch - 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete

Pay with

Anrik 1/4 inch x 2-1/4 inch - 20 Pieces Wedge Features

• Wedge anchor diameter: 1/4" | Length: 2-1/4" | Qty: 20 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust

• Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only)

• The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 4 ft/lbs.

• The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed. It is for concrete only, not for block or brick base material

• The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is ideal for structural anchorage, storage racking anchorage, machinery and hand rails installation

About Anrik 1/4 Inch X 2-1/4 Inch - 20 Pieces Wedge

Application The Anrik wedge anchor is made from high quality carbon steel, and is zinc plated. The concrete anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull out values in concrete are needed. It is for Concrete only, not for block or brick base material Diameter of Anchor The diameter of the anchor is 1/4" Length Anchor The length of the anchor is 2-1/4" Quantity: 20 pieces Drill Bit Diameter/Hole Diameter Drill bit diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only) Thread Length The length of the threads on the anchor is 1-1/4" in length Minimum Embedment Depth The minimum embedment depth into the concrete is 1-1/4" Torque Value The required installation torque of the anchor is 4 ft/lbs Maximum fixture thickness The maximum fixture thickness or the maximum thickness of the material being fastened for the anchor is 1". This will ensure that the minimum embedment depth of 1-1/4" will be met