Clear Security and Safety Window Film Shatterproof Adhesive UV Blocking Explosion-Proof Glass Protective Vinyl for Home and Office, 2mil, 0.05mm, 17.7Inch x 78.7Inch

Pay with

Clear Security and Safety Window Film Shatterproof Features

• ⭐96% VLT - Since its 96% VLT keeps the transparency of the window, so you can enjoy the warmth of the sun without having to worry about the harmful solar rays

• ⭐BREAK STRENGTH and HARDNESS: This safety film will keep the windows intact, absorb impact from break-in attempts and hold shattered glass together in case of breakage, and to protect your valuables and your family from broken glass, break-in and theft

• ⭐SELF - ADHESIVE - Use two pieces of tape to grab onto one of the corners on each side of the film. Once you start pulling apart the tape, the backing liner should start to peel off from the window film itself. And please spray as much soapy water as possible on the glue side and glass before putting it on the window

• ⭐APPLICATION - Bathroom, sliding doors, children's window glass, display cabinets Senior housing, villas, shopping malls, jewelry stores, frontage stores, airports, railway stations, docks, kindergartens, schools, banks glass security and a strong security needs of private house glass

• ⭐AFTERSALES SERVICE - Whether your windows are small or big, our products come in a variety of sizes to suit your individual needs. It is usually recommended and sometimes necessary that you have more than enough film to cover the window so that you have a margin for error and can trim the excess pieces as you install. Any question, please contact me

About Clear Security And Safety Window Film Shatterproof

Specification: Available Length: 60in, 78.7in, 10ft, 16.5ft, 33ft, 66ft, 100ft(Any length can be customized, please contact us) Available Width: 17.7in, 20in, 24in, 35.4in, 60in(Any width can be customized, please contact us) BASIC PARAMETER Thickness: 2mil VLT(visible light transmission): 96% Break Strength: 75lbs/in SR Hardness: >2H Features PET material, Transparent, Shatter, UV Blocking, Not affect appearance, Strong adhesive, Removeable adhesive, No any glue problem, Easy to inastll Installation Steps: Step 1. Trim films to the size you want (a little biger than you need) Step 2. Keep Window or Glass clean Step 3. Wet the Window or Glass with much soapy water Step 4. Remove the adhesive film from backing liner ( Please make sure you have removed it before you apply the matte window film to glass) Step 5. Wet the adhesive film with much soapy water Step 6. Set up film on glass Step 7. Squeegee away water and air bubbles with scraper Step 8. Cut off margins and enjoy your works Quick tip: 1. In order to easily remove the protect backing film, simply use 2 pieces of tape to apply to both sides of the corners and pull.Please spray a lot of water before installation. Its better to watch the installation video of window film on YouTube before installation.