OTUAYAUTO Windshield Washer Pump Replacement for 2007-2011 Honda CR-V - Factory OE Style with Grommet 76806-SMA-J01

Pay with

About OTUAYAUTO Windshield Washer Pump Replacement For

It provides the performance and dependability you expect from OTUAYAUTO. The following fitment list just for reference. In order to avoid bringing your troubles, please check carefully if the product is same as the original washer pump of your car before purchase. OTUAYAUTO Windshield Washer Pump Vehicle Fitment: Honda： 2007-2011 Honda CRV CR-V How to use There are many videos on the internet that may show you how to replace the pump, some tips for the install below: 1. Access to washer pump may be gained by partly removing the inner wheel arch of the bumper trim. 2. The washer pump is push fitted into the washer bottle. 3. The washer pipes should be push-fitted on, some may have a clip to release them if push-fitted on and they are hard to remove heat them up with a hairdryer and they will come off very easily. 4. Never let washer pump run dry as this causes failure, also put more windscreen washer fluid than is recommended as it is less likely to freeze. 5. Do not put anti-freeze into washer bottle, always put windscreen fluid in first then top up with water. Maybe Tools Needed: 7 mm socket or combination wrench 10 mm socket and ratchet 3/4" socket or lug wrench for the wheel Torque wrench for checking lug nut torque when finished Large screwdriver to assist in removing the headlight assembly retaining clips