We specialize in hard to find items
All Categories
Engine Oil Tester Test Machine Lubricating Engine Oil Carbon Deposit Tester for Carbon Deposit, Viscosity, Boiling Point, Oxidation Resistance, Acidity Test
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Engine Oil Tester Test Machine Lubricating Engine
Specification: Voltage: 110V / 220V Power: 300W *2 Plug: US plug Display mode: digital display (current temperature) Weight: 9kg Uses: Test the carbon deposit, viscosity, boiling point, oxidation resistance, acidity test at high temperature Instructions for use: 1. Check all the connections of the instrument (power cord, temperature sensing rod, when the temperature sensing rod is inserted, pay attention to the positive and negative poles. Do not connect the reverse polarity. The easiest way is to look at the plug and the screw on the socket in the same direction). 2. Turn on the power, set the heating temperature according to the requirements, the temperature only needs to set the temperature table on the left (the instrument has two thermometers, the temperature meter on the left is set the temperature of the instrument, the green number on the left is the instrument Set the temperature, the red number on the top left shows the instantaneous temperature of the instrument; the temperature meter on the right does not need to be set, and the red number shows the instantaneous temperature of the lubricant in the test tube. This step is very important. 3. Add the lubricant to be tested in the test tube (the contrast oil and the test should be clearly marked). The depth of the oil is about 2/3 of the test tube. 4. Add a copper rod to the test tube. 5. Insert the temperature sensing rod into the oil to be compared. 6. Turn on the power and start heating. 7. Record the time and temperature at which heating begins. 8. During the heating process, carefully observe the changes in the oil in the test tube, and record the time and temperature at which the oil starts to bubble.
