All Categories
Get it between 2024-05-16 to 2024-05-23. Additional 3 business days for provincial shipping.
A Built-in shock absorber can reduce the damage caused by shock (drop or misuse).
The measurement range provides reliable, simple, fast, and all-round fabric tension meter measurement, and can eliminate the error of manual or tactile measurement.
The pointer-type indication of tension (unit: Newton), mechanical automatic operation, without the use of batteries or power to start. Provide simple control functions and quick adjustment procedures and ensure that the measured value is accurately displayed.
an be randomly detected tension on any position of the stretched fabric, The tensiometer generally tests the radial and weft direction of the stencil tension, so that the stencil achieves the same direction of the diameter and weft line. Whether it is a new taut mesh repeated use of the old mesh, can provide reliable tension test data.
Suitable for high-tension silk screen tension measurement with high accuracy,
INSTRUCTION 1. Before using, please put the tension meter on the glass and turn the dial to make the pointer return to zero. 2. Flick the silk screen during the measuring. The tension of the silk screen indicates when the pointer stopped. 3. The tension meter is a precision meter. Fall and touch are forbidden, be careful during use. 4. The tension meter was tested precisely when leaving the factory. Dismounting alone is not allowed. 5. Can’t touch the bottom side contactor by hand. Put the machine vertically without using it. 6. The Newton indication indicates the tension’s contractor. The error is +0.5N. 7. The indication of the second circle is the measured value during the measuring. User tips: 1. Tension meter has been calibrated before leaving the factory, so you don’t need to adjust it yourself. 2. Method of data display method: data of the pointer of the tension meter is not accurate at the first circle. The second circle is exact (meanwhile, you should flick the mesh beside the tension meter). The second circle of the pointer is the regular reading. 3. N/cm: pulling force of mesh /every centimeter in width (it generally takes N or Kg to represent 1 kg = 9.8 N). 4. The small pointer is used to display the number of circles of the large pointer. (If the small pointer points to “2”, the large pointer has circled twice). 5. Data regular reading: You can read the data with a significant pointer. 6. Calibration: put the tension meter on the glass plate, then the pointer circles for 2 and a half rounds, and points to “▽,” which is accurate